Dual Ring 2 - O Ring Manufacturers in India

Sizes Available

NameSize
Tight Fit "Fix O Ring"50mm
Tight Fit "Fix O Ring"75mm
Tight Fit "Fix O Ring"90mm
Tight Fit "Fix O Ring"110mm
Tight Fit "Fix O Ring"160mm

Product Description

The NEO RUBBER PRODUCTS is the best O ring manufacturers in India. And we are proud to introduce a new product named TIGHT FIT under its lable wings NEO RUBBER'S. Tight Fit is a seal that ensures a complete leak proof system is in place. This seal is named Fix O Ring. The yellow-black seal (Fix O Ring) holds itself permanently in the groove and doesn't fall out. The rubber ring ensures leak-proof joints and helps compensate for the thermal expansion and contraction of Plastics.

NEO RUBBER ensures that Fix O Ring is at par with International Standards.

Features

  • It is being made with advanced co-moulding technology.
  • It consists of a plastic reinforced rubber ring which holds the Fix O Ring in groove properly, thus ensuring 100% leak proof joints.
  • It also gives the power to the joints to withstands high-pressure flow rates.
  • Unlike conventional rubber rings which slip out of the groove during installation, the Fix O Ring holds itself and stays attached to the groove by the plastic reinforcement that enables the joints to become 100% leak proof.
  • No Solvent Cement required for making joints Cost Effective.
  • High Flow rates - No chocking.
  • Accurate and perfect dimensional control.

Jointing Instructions

  • Measure and cut pipe to size - Ensure to cut pipe square.
  • Chamfer end of pipe to 10-15 degrees. Remove all burr from pipe with a Knife-edge or deburring tool.
  • Clean pipe with cloth.
  • Check the fitting for Yellow seal.
  • Apply lubricant on chamfered end of pipe & on inner surface of pipe/fitting to be joined.
  • Push the pipe firmly into the socket - leave about 10mm gap for thermal expansion allowance.