Neo Rubber Products

Product Description

The NEO RUBBER PRODUCTS is the best ‘O’ ring manufacturers in India. And we are proud to introduce a new product named TIGHT FIT under its lable wings NEO RUBBER’S. Tight Fit is a seal that ensures a complete leak proof system is in place. This seal is named Fix ‘O’ Ring. The yellow-black seal (Fix ‘O’ Ring) holds itself permanently in the groove and doesn’t fall out. The rubber ring ensures leak-proof joints and helps compensate for the thermal expansion and contraction of Plastics.

NEO RUBBER ensures that Fix ‘O’ Ring is at par with International Standards.

Features

1. It is being made with advanced co-moulding technology.
2. It consists of a plastic reinforced rubber ring which holds the Fix ‘O’ Ring in groove properly, thus ensuring 100% leak proof joints.
3. It also gives the power to the joints to withstands high-pressure flow rates.
4. Unlike conventional rubber rings which slip out of the groove during installation, the Fix ‘O’ Ring holds itself and stays attached to the groove by the plastic reinforcement that enables the joints to become 100% leak proof.
5. No Solvent Cement required for making joints Cost Effective.
6. High Flow rates – No chocking.
7. Accurate and perfect dimensional control.

Jointing Instructions

1. Push the pipe firmly into the socket – leave about 10mm gap for thermal expansion allowance.
2. Measure and cut pipe to size – Ensure to cut pipe square.
3. Chamfer end of pipe to 10-15 degrees. Remove all burr from pipe with a Knife-edge or deburring tool.
4. Clean pipe with cloth.
5. Check the fitting for Yellow seal.
6. Apply lubricant on chamfered end of pipe & on inner surface of pipe/fitting to be joined.